What is cork material ?
Cork is composed of dead cells that accumulate on the outer surface of the cork oak tree. Because of its honeycomb-like structure, cork consists largely of empty space; its density (weight per unit volume) is one-fourth that of water. Unlike a honeycomb, however, cork consists of irregularly shaped and spaced cells having an average of 14 sides. With 625 million of these empty cells per cubic inch (40 million per cubic centimeter), cork is like many layers of microscopic Bubble Wrap, making it an effective cushioning material. Its low density makes cork useful in products like life preservers and buoys. The large amount of dead-air space makes cork an effective insulation material for both temperature and noise. Furthermore, it is fire retardant; flames will only char the surface, and no toxic fumes are generated. Cutting the surface of cork turns many of the microscopic cells into tiny suction cups, creating an effective non-slip surface. In addition to being flexible, cork is highly resilient. After being crushed under a pressure of 14,000 lbs/in 2 (96,000 kPa), cork will regain 90% of its original size in 24 hours. Cork absorbs neither dust nor moisture, and it resists both rot and insects. Highly resistant to wear, it is used for polishing diamonds.
Among the many products made from cork are flooring materials (e.g., linoleum), shoe insoles, roofing panels, gaskets, safety helmet liners, bottle stoppers, dartboards, bulletin boards, nd cores for golf balls and baseballs. Numerous artificial materials have been developed to substitute for cork in specific applications (e.g., a synthetic pea in a referee's whistle, foam insoles for shoes, or Styrofoam life preservers). However, no general substitute has been developed for cork that can be used in diverse applications.
Cork Manufacturing Process
1 .Using a specially designed hatchet, the harvester slices through the cork layer on the trunk of the tree, taking care not to cut deep enough to damage the living portion of the trunk. Horizontal cuts are made at the base of the trunk and just below the lowest branches. A few vertical cuts separate the circumferential cork ring into sections of an appropriate size. Using the wedge-shaped handle of the hatchet, the harvester strips each panel of cork from the tree. On some large trees, cork is also stripped from the lower branches.
2. The cork planks are stacked outdoors and left to cure for a time ranging from a few weeks to six months. The fresh air, sun, and rain encourage chemical changes that improve the quality of the cork. By the end of the curing process, the planks have flattened out and lost about 20% of their original moisture content.
3. The planks are then treated with heat and water to remove dirt and water-soluble components like tannin, and to make the cork softer and more flexible. This process typically involves lowering stacks of cork planks into large copper vats filled with boiling water containing a fungicide. Heavy weights are placed on top of the cork to keep it submerged for 30-75 minutes.
4. When the planks are removed from the vat, a hoe-shaped knife is used to scrape off the poor-quality outer layer of cork, which amounts to about 2% of the volume of the plank but 20% of its weight. The planks are stacked in a dark cellar and allowed to dry and cure under controlled humidity for a few more weeks.
5. The cork planks are trimmed to a uniform, rectangular shape and are sorted by quality. The finest quality material will be used to make natural cork products like wine bottle stoppers. Poorer quality material will be ground and used to make composition or agglomerated cork